西门子6SL3244-0BB13-1BA1

TM31 Terminal Module

With the TM31 Terminal Module, the number of available digital inputs and outputs and the number of analog input and outputs within a drive can be expanded.

The TM31 Terminal Module also features relay outputs with changeover contact and a temperature sensor input.

设计

The following are located on the TM31 Terminal Module:

• 8 digital inputs

• 4 bidirectional digital inputs/outputs

• 2 relay outputs with changeover contact

• 2 analog inputs

• 2 analog outputs

• 1 temperature sensor input for KTY84‑130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17 and higher)

• 2 DRIVE‑CLiQ sockets

• 1 connection for the electronics power supply via the 24 V DC supply connector

• 1 PE/protective conductor connection

The status of the TM31 Terminal Module is indicated via a multi-color LED.

The TM31 Terminal Module can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

The signal cable shield can be attached to the TM31 Terminal Module via a shield connection terminal, e.g. type SK8 supplied by Phoenix Contact or type KLBÜ CO 1 supplied by Weidmüller. The shield connection terminal must not be used as a strain relief mechanism.

集成

The TM31 Terminal Module can communicate via DRIVE‑CLiQ with the following Control Units.

• CU310‑2 Control Unit

• CU320‑2 Control Unit

• SINUMERIK Control Unit

• SIMOTION D Control Unit

• SINAMICS DCM Advanced CUD

Connection example of TM31 Terminal Module

技术规范

TM31 Terminal Module

6SL3055-0AA00-3AA1