全国服务热线 18602118379

SIEMENS西门子阳泉S7-400模块代理商

更新时间:2023-09-19 08:00:00
价格:请来电询价
西门子:模块
纸盒:包装
现货:全新原装
联系电话:18602118379
联系手机: 18602118379
联系人:杜丕琳
让卖家联系我
详细介绍

 SIEMENS西门子阳泉S7-400模块代理商
高端性能范围内的高性能 CPU

  • 适用于对性能要求很高的工厂

  • CPU 416-3 PN/DP 中集成了 PROFINET 功能

注:

SIPLUS extreme 产品基于 SIMATIC 标准产品。此处列出的内容来自相关的标准产品。添加了特定 SIPLUS extreme 信息

有关 SIPLUS 的技术文档,可访问网址:

应用

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

设计QQ截图20221215165418.p

Both CPUs are equipped with the following:

  • Powerful processor:
    The CPUs achieve instruction execution times as low as 0.03 µs per binary instruction.

  • CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data);
    CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data);
    CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data);
    fast RAM for parts of the user program relevant to execution.

  • Flexible expansion:
    Up to 262144 digital and 16384 analog inputs/outputs.

  • Multi-point interface MPI:
    With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.

  • Mode selector switch:
    Designed as toggle switch.

  • Diagnostics buffer:
    The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.

  • Real-time clock:
    The date and time are appended to diagnostic messages of the CPU.

  • Memory card:
    For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available

  • Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):
    The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
    Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

EXM 438-1 -I/O扩展模块EXM 438-1 -I/O扩展模块EXM 438-1 -I/O扩展模块

EXM 448/448-1通信扩展模块 EXM 448/448-1通信扩展模块EXM 448/448-1通信扩展模块工艺元件T400工艺元件T400工艺元件T400

T400:工艺模块T400:工艺模块T400:工艺模块

SRT400:用于T400的子机架SRT400∶用于T400的子机架SRT400:用于T400的子机架

1)不能进行内部节点的等距离通讯;使用COM PROFIBUS组态

运行模式

连接到FM 458-1 DP

EXM448通过内部总线直接连接到FM458-1 DP基本模块。SIMATIC机架的背板总线只用于供电,不能进行数据传输。通过所组态的功能块进行I/O访问

用CFC进行组态而不是编程

FM485-1DP使用*的STEP7和CFC软件工具进行组态,该组态工具也用于对SIMATIC S7-400进行编程。

CFC基于Windows,易学易用。CFC可以通过D7-SYS扩展软件包进行扩展,该软件包含有功能块以及优化的操作系统可以在“SIMATIC工业软件/工程工具”下找到关于D7-SYS的更多信息

用COM PROFIBUS进行DP主站编程

如果一个EXM448用作一个PROFIBUS DP主站,**使用COM PROFIBUS PC程序计算相关的总线参数,并下载到通过EXM 448。当作为DP从站使用时,不需要COM PROFIBUS计算参数

总线参数可通过下列接口下载到EXM 448扩展模块

功能

  • Block protection:
    A password concept protects the user program from unauthorized access.

  • Integral HMI services:
    The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.

  • Integrated communications functions:

    • PG/OP communication

    • Shared data communication

    • S7 standard communication

    • S7 communication

  • Firmware update using network

CPU 416-3 PN/DP additional:

  • Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)

  • Distributed intelligence in Component Based Automation (CBA) on PROFINET

  • Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

  • Multi-point interface MPI:

    • Definition of station addresses.

    • Startup/cycle behavior

    • Stipulation of the maximum cycle time and communications load

  • Address assignment:
    Addressing of I/O modules.

  • Retentive ranges:
    Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.

  • Size of the process image, local data.

  • Length of the diagnostics buffer

  • Protection level:
    Definition of access authorization for program and data

  • System diagnostics:
    Definition of the handling and scope of diagnostic messages

  • Timed interrupts:
    Setting of periodicity

    • PROFINET interface

    • Parameterization of time synchronization using NTP procedure

    Indication and information functions
    • Status and error indicators:
      LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example

    • Test functions:
      The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components

    • Information functions:
      The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories


联系方式

  • 地址:上海松江 上海市松江区广富林路4855弄88号3楼
  • 电话:18602118379
  • 经理:杜丕琳
  • 手机:18602118379
  • 微信:18602118379
  • QQ:965801538
  • Email:965801538@qq.com